Piranha Racewerks Return Fuel System Kit
Piranha Racewerks complete return fuel system
The Piranha Racewerks is the most robust and cheapest in price compared to our competitors options, we offer everything you need to complete a return fuel system on your 2008-2016 2.0T, the kit can be modified by you to work with 3.8 non-GDI engines. You can select options to include or exclude the fuel feed line, include or exclude a fuel pressure gauge, and finally we can include or not include the AEM E85 flex fuel sensor (AEM 30-2201) that you can wire directly into a Haltech or other standalone tuner to select different fuel setings based on the fuel coming into the sensor.
Kit comes with the following if selected in options above (you must select to receive specific parts below)
Aeromotive A1000-6 Pressure regulator in red top silver bottom
Piranha Racewerks Fuel feed line and fittings
Piranha Racewerks Fuel Rail return fitting
Piranha Racewerks Intank FPR regulator delete
Customized Fuel pump assembly (core deposit or ship in your complete unit) see red notes below*,**
Fuel rail to Regulator hose and -6AN fittings
Regulator to fuel pump assembly hose and -6AN fittings
*if you select core and pay the $150.00 deposit you will receieve your core deposit back if you send in your complete unit within 15 days of getting your complete kit in the mail from us.
**We can only accept fuel assemblies from 2008-2012 2.0T (part number on top of assembly 31110-2M500) all other assemblies cannot be turned in as a core return or for us to use to build your kit.
Fuel Pump Assembly Deposit
You pay us a deposit in case you don't return your fuel pump assembly to us or your pump assembly is not from a 2008-2012 with part #31110-2M500
Fuel Pressure Gauge
include or not include the aeromotive fuel pressure gauge that connects to the underhood Aeromotive fuel pressure regulator.
include a Walbro 450LPH which can handle E85, racing flex fuels and race fuel
Fuel Feed Line Fitting
Select if you want straight which is default and if you are going stright from the factory hardline and normally to our fuel feed line kit or the 90 degree option which is for when a Flex fuel sensor is being used(note if you select to include the AEM E85 sensor or the lines and fittings for a sensor this you will get a 90 degree fitting not the straight)
Includes end of fuel rail fitting
Fuel rail to underhood Aeromotive fuel pressure regulator hose with AN fittings assembled (1-straight, 1-180 degree)
Aeromotive A1000 (13109) fuel pressure regulator. (if selected in options)
Hose from underhood Aeromotive fuel pressure regulator to the top of the fuel pump assembly with AN fittings assembled (1-straight,1-90 degree)
Build Pump Assembly
We will build the entire pump assembly with all clapms, install fuel pump selected, install bulkhead for fuel return line, also the in tank fuel pressure regulator delete(part made by us) is installed, please see photo for what the white pump assembly looks like after we are done with assembly, this process takes us around 3 hours per assembly and is not easily done by the average customer as special bits are required to get a factory like assembly.
Fuel Pump Assembly DepositCore Deposit, Send my Unit In, Not applicable (buying lines only)
Fuel Pressure GaugeInclude, not included
Fuel PumpAdd Walbro 450LPH, Use factory 280LPH
Fuel Feed Line outlet AN FittingStraight, 90 Degree, Remove Fuel Feed Line from kit
E85 SensorNo Sensor, AEM 30-2201 + fuel lines + fittings, Fuel lines + Fittings for E85 Sensor Haltech/AEM
Return LinesInclude, Exclude
Build Pump AssemblyBuilt by us (fully assembled), No pump assembly
Fuel Pressure RegulatorAeromotive A1000 (13109), No Regulator